If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Mails made with the scan>e-mail function are having the subject: "Message from CAN-C-284e" I looked around but cannot find the place where to alter this. Any help please?
"8.24 Administrator/Machine Settings8.24.1 Administrator Registration (1) Use• Registers administrator information displayed Help service/Administrator information screen as well as sender addresses used for E-mailtransmission from the machine.(2) Procedure1. Touch [Administrator Name], [E-Mail Address] to input them.2. Using the 10-key pad, enter the extension No.8.24.2 Input Machine Address (1) Use• To register the name of the machine and e-mail address.
Device Name
When the file name of the transmitted file or the document name of document registered in Box is generated automatically, it is added.
E-Mail Address
To be used as from address at internal Fax transmission.
"
We know a thing or two because we've seen a thing or two.
The medication helps though...
A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.
Blessed are they who can laugh at themselves, for they shall never cease to be amused.
Somewhere in the machine once has been entered "CAN-C-284e" resulting in that the machine sends scans to e-mail addresses with a subject line: Message from CAN-C-284e"
Most likely I added myself this CAN-C-284e because it was with the older generations, always my standard: "CAN-C-360" for instance. Resulting in the subject line for those old machines in: SCAN-C-360 (an S was always added in the beginning by the system for some reason).
In the old machines, the place to enter the subject was found here:
Utility/Counter -
Administrator Settings -
Register Administrator -
Input Machine Address.
Change the Device
Name. This will appear in
the scan filename instead
of SKMBT.
The later generations do not have this possibility, but somehow I still managed to change this BH-C-284e machine, resulting in the now unwanted subject field.
8.25.3 E-Mail Settings(1) E-Mail Subject(a) Use• To register the e-mail subject for transmitting the scanned data by e-mail.(b) Procedure• Touch [New] to register the new subject.• Select any displayed subject to detail check, edit, or delete the setting.• The subject can be set as default by selecting the subject displayed on the screen and pressing [Set as Default].
Synth, the procedure you describe I cannot find in the manual nor with Pagescope. In the Pagescope machine interface there is an empty list allowing 10 subject entries, but there is no button to set one of them as default.
Are we talking about the same? Where to find your 8.25.3 E-Mail Settings as you describe? User Manual? Pagescope?
Mails made with the scan>e-mail function are having the subject: "Message from CAN-C-284e" I looked around but cannot find the place where to alter this. Any help please?
Hans
In scan, at the bottom, go to 'File name/Subject name/Other' and enter your email subject text.
then save that as the default in 'Utility - Scan settings - Basic settings - Default scan setting' and change to 'Current Setting'
that should add your subject text to every outgoing email.
In scan, at the bottom, go to 'File name/Subject name/Other' and enter your email subject text.
then save that as the default in 'Utility - Scan settings - Basic settings - Default scan setting' and change to 'Current Setting'
that should add your subject text to every outgoing email.
YEP!
That's the solution.
Thanks CopyTechTrouble and thanks to all the other guys for their input.
Comment