If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
MPC3503 Copier Mode Stapling works, but not when printing.
[Misc]
MPC3503 Copier Mode Stapling works, but not when printing.
Good morning, dear colleagues in the ink and toner industry.
Recently, a customer called us at our workshop with the following incident. They bought the 2nd hand machine, and its operation is totally normal with any function in the "Copier Mode". The strange thing is that until today they had not noticed that when printing (and only when printing) "Does not staple", it is strange, since I checked that the finalizer (SR3140) was correctly indicated in the driver, and to rule out problems in the client's Computer, I did some tests with My Laptop that has Gnu-Linux (specifically Linux Mint), and the exact same thing happens. Regardless of the device's settings in the "Won't Staple" prints, has it ever happened to you?
"ALL WILL BE WELL" The battle cry that most inspires me to follow, from the DC's Comic character that I admire the most. And I feel satisfied with being better every day, and with using Gnu-Linux as my usual Operating System.Apologies for my English, it's not my mother tongue and I'm helping the translator.
Good morning, dear colleagues in the ink and toner industry.
Recently, a customer called us at our workshop with the following incident. They bought the 2nd hand machine, and its operation is totally normal with any function in the "Copier Mode". The strange thing is that until today they had not noticed that when printing (and only when printing) "Does not staple", it is strange, since I checked that the finalizer (SR3140) was correctly indicated in the driver, and to rule out problems in the client's Computer, I did some tests with My Laptop that has Gnu-Linux (specifically Linux Mint), and the exact same thing happens. Regardless of the device's settings in the "Won't Staple" prints, has it ever happened to you?
try checking the weight of the paper on the machine settings, it could be set higher than 2, if I remember correctly it is the maximum.
However, it updates the firmware of both the machine and the finisher
try checking the weight of the paper on the machine settings, it could be set higher than 2, if I remember correctly it is the maximum.
However, it updates the firmware of both the machine and the finisher
This - I had a similar problem that was solved by updating both the machine and the finisher's firmware.
' "But the salesman said . . ." The salesman's an asshole!' Mascan42
'You will always find some Eskimo ready to instruct the Congolese on how to cope with heat waves.' Ibid
I'm just an ex-tech lurking around and spreading disinformation!
try checking the weight of the paper on the machine settings, it could be set higher than 2, if I remember correctly it is the maximum.
However, it updates the firmware of both the machine and the finisher
Machine with the Latest Firmware
Tests carried out: COPIER MODE
- Different types of paper: Normal 80gr. / Medium Thickness / Thickness 1
- In different cassettes
Everything works without problem
Tests carried out: PRINTER MODE
- Different types of paper: Normal 80gr. / Medium Thickness / Thickness 1
Does not staple.
- In different cassettes
Does not staple
- Testing with OS different
Does not staple
The only thing left to do is update the firmware of the finalizer, which I haven't had time to download.
"ALL WILL BE WELL" The battle cry that most inspires me to follow, from the DC's Comic character that I admire the most. And I feel satisfied with being better every day, and with using Gnu-Linux as my usual Operating System.Apologies for my English, it's not my mother tongue and I'm helping the translator.
Tests carried out: COPIER MODE
- Different types of paper: Normal 80gr. / Medium Thickness / Thickness 1
- In different cassettes
Everything works without problem
Tests carried out: PRINTER MODE
- Different types of paper: Normal 80gr. / Medium Thickness / Thickness 1
Does not staple.
- In different cassettes
Does not staple
- Testing with OS different
Does not staple
The only thing left to do is update the firmware of the finalizer, which I haven't had time to download.
its very, very strange, could be that any user have play with "use command/driver" function in user tools-printer settings?
ahhh.....but its true that mint use other port and driver!...and non work anyway.
its very, very strange, could be that any user have play with "use command/driver" function in user tools-printer settings?
ahhh.....but its true that mint use other port and driver!...and non work anyway.
Check the "command/controller" option you mention, and alternate between the different options and the response is the same when printing.
Right now I feel very deeply in the unknown.
Is there any SP that blocks device functions at the printing level?
"ALL WILL BE WELL" The battle cry that most inspires me to follow, from the DC's Comic character that I admire the most. And I feel satisfied with being better every day, and with using Gnu-Linux as my usual Operating System.Apologies for my English, it's not my mother tongue and I'm helping the translator.
at this point, I would proceed with the finisher firmware
I must be looking where it is not or simply does not exist.
I'm looking for the firmware for the finalized one and nothing appears on the website, they only appear for the machines.
"ALL WILL BE WELL" The battle cry that most inspires me to follow, from the DC's Comic character that I admire the most. And I feel satisfied with being better every day, and with using Gnu-Linux as my usual Operating System.Apologies for my English, it's not my mother tongue and I'm helping the translator.
I must be looking where it is not or simply does not exist.
I'm looking for the firmware for the finalized one and nothing appears on the website, they only appear for the machines.
You Need go to octopus, digit the model of product in "model" field, and appear all about your product, now i at home, and i cant check for you...anyway try to reset printer sp by 5-801-printer, maybe work it
You Need go to octopus, digit the model of product in "model" field, and appear all about your product, now i at home, and i cant check for you...anyway try to reset printer sp by 5-801-printer, maybe work it
Comment