If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Ricoh C4000 will only duplex plain paper (splits all other types of paper)
Ricoh C4000 will only duplex plain paper (splits all other types of paper)
Hi Guys,
I'm dealing with a Ricoh C4000 that will separate any duplex job onto two separate sheets whenever any other paper option other than "plain" is selected.
For example- customer can print a two page document duplexed no problem with plain. However, if they try to print the same exact job on glossy or cardstock, it will print on two sheets of paper. (Front on one page and rear on another.)
I've tried different types of files (Image, PDF, word, etc) and no luck.
Could this be an issue with the duplexer not handling heavier stock? Or would this be more of a hardware settings issue?
Re: Ricoh C4000 will only duplex plain paper (splits all other types of paper)
Sounds more like a setting problem unless the other papers are heavier stock. The paper trays can handle up to 256.0 g/m2, 68 lb. The duplex only up to 169.0 g/m2, 45 lb.
Back to settings. User Tools - System Settings - Tray Paper Settings. There is an option for each tray of Apply Duplex. If a tray has been changed to NO. then you cannot duplex that tray. The bypass cannot be used for duplex due to a paper path conflict.
Re: Ricoh C4000 will only duplex plain paper (splits all other types of paper)
I believe the paper is digital laser 100 lb glossy cover. Would the only option be for them to print their run single sided and the re-run it back for the reverse?
Re: Ricoh C4000 will only duplex plain paper (splits all other types of paper)
Originally posted by PressingPrintz
I believe the paper is digital laser 100 lb glossy cover. Would the only option be for them to print their run single sided and the re-run it back for the reverse?
Sent from my iPhone using Tapatalk
Yes but. with that heavy of a glossy paper they are liable to get a lot of jamming. If they/you are going to do a lot of that type jobs you will need a straight through or nearly straight through paper path printer.
Re: Ricoh C4000 will only duplex plain paper (splits all other types of paper)
Originally posted by slimslob
Yes but. with that heavy of a glossy paper they are liable to get a lot of jamming. If they/you are going to do a lot of that type jobs you will need a straight through or nearly straight through paper path printer.
Re: Ricoh C4000 will only duplex plain paper (splits all other types of paper)
just a thought. Try increasing the I/O buffer size. Usually, if it prints on plain, it should print duplex on other stock, but give it a try anyway, as the memory size does affect duplex printing.
THE ONLY THING FOR EVIL TO TRIUMPH IS FOR GOOD MEN TO DO NOTHING..........edmund burke
Re: Ricoh C4000 will only duplex plain paper (splits all other types of paper)
Originally posted by PressingPrintz
Hi Guys,
I'm dealing with a Ricoh C4000 that will separate any duplex job onto two separate sheets whenever any other paper option other than "plain" is selected.
For example- customer can print a two page document duplexed no problem with plain. However, if they try to print the same exact job on glossy or cardstock, it will print on two sheets of paper. (Front on one page and rear on another.)
I've tried different types of files (Image, PDF, word, etc) and no luck.
Could this be an issue with the duplexer not handling heavier stock? Or would this be more of a hardware settings issue?
try to check that in the paper cassette setting, where the weight is indicated, the "apply to duplex" item is selected
Comment